cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
464
Views
0
Helpful
1
Replies

SF302-08P accessing from the rest of the network.

eto-my-Icon
Level 1
Level 1

I have recently added an 8 port SF302 to my network and  got it setup with basic configuration with several Vlans including voice vlan and they all seem to be working ok. Except for a couple of things.

1.I cant access this switch from anywhere else on my network.

2. I can only access it by plugging into a port on the switch that is trunk port and is on vlan1.  (Why can I access it from a trunk port (in vlan1) but not from an access port (in vlan1).

All my other switches I can access from any device on any vlan on the network. I'm not sure what extra settings i need to configure for this? i want to be able to telnet to it and be able to access the web console regardless of what vlan i am on anywhere on the network.

 

any insight will be much appreciated

 

E

1 Reply 1

Aleksandra Dargiel
Cisco Employee
Cisco Employee

Hi E,

If trunk port settings  are 1UP and access port also 1UP those two ports should work the same way.

can you post your show running configuration? 

Aleksandra