SF302-08P - No PoE?

[Aenon]

Hi Guys,

I have a small 8 port PoE switch that is no longer supplying PoE on any of the ports (switching functions are fine, just no PoE supply on the ports).

Is there anything I can do to troubleshoot this or do I need to give it up as dead?

I've attached a couple of screenshots but since there was no power flowing I currently don't have any devices connected requiring PoE.

The 

[marce1000]

    -  Note that these devices have been end of support (EOL) for a long time , including : you won't have many options for small business devices ; you can only fallback to for instance; full power cycle or  factory reset or both (e.g.)

  M.