Some times ago I buyed a SFE 2000, and now I configured a igmp/multicast and multicasting works good but time to time switch crash and resseting self with this logs:
-------------------------------
09-Apr-2010 17:37:41 %BRG_I GMP-F-UNKNOWN_VALUE: BIGMPP_indication: Unknown value of frame type recieved for igmp snooping
***** FATAL ERROR *****
Reporting Task: BRMN.
Software Version: 3.0.0.17 (date 08-Nov-2009 time 12:59:16)
0x1842ac
0x181910
0x5d4658
0x425d98
0x428e30
0x4b0710
0x6403f0
0x4af828
0x5538c4
**************************************************
***************** SYSTEM RESET *****************
**************************************************
Boot1 Checksum Test...............................PASS
............
-----------------------------------
Bug with firmware , my configurationa or ???
Adam
Message was edited by: adam@popik.pl
I can reproduce this fatal error:
1. factory reset switch
2. setting to standalone
3. G3 will be "uplink" with 2 vlans (10 as amanagement untagged 120 tagged)
4. e4 access port with vlan 120
5. e24 general port with only tagged frames 9vlan 10 and 120 tagged) connected to AccessPoint
6. Enabling igmp snoping globally and on vlan 120
7 Unregistered (on all ports) multicast setting to Filtering
8. Enabling "Enable Bridge Multicast Filtering"
An now ... connecting my Palm to wireless access point confusing switch to fatal error and reset .. with above errors ....
