I have an SG 100D-08 and an SG 100-16 for use in a Development lab -- specifically working with M$ SCCM 2007 and Windows Deployment Services for WIM image (Windows 7) deployment.
The 100D-08 was plug and go and works fine for both unicast and multicast deployments.
I needed more capacity, so I wired up the SG 100-16. The client machines connect to the Deployment server, load the boot.wim, start to download the install.wim and then hangs up 2%. It never finishes, although it appears to be passing traffic like crazy! I put the 100D-08 back in place and it just works!
I suspect I have a bad unit, but before I pack it back up and return it, I thought I would post the question here.
TIA for any assistance / advice.
~Jim