SG220 double login

[Jernej.Sinic]

I have problems with double login on Cisco SMB SG220 (IOS version 1.1.4.1 ). There is no option to enable Automatic login in GUI (no option in GUI Security > SSH Server > SSH User Authentication and tick Enable for SSH User Authentication by Password)

On CLI there is no command ip-ssh password-auth.

Could someone help with this issue?

Thanks

[mdangeles6]

UP!

I'm also having this issue and looking for a fix.

[Jitendra Kumar]

have you tried with below guidance.

https://www.cisco.com/c/en/us/support/docs/smb/switches/cisco-small-business-200-series-smart-switches/smb90-user-account-configuration-on-200-300-series-managed-switche.html

keep checked both user and check box for CLI 

[nbutlev]

Hi there,

My name is Nikola and I'm a Cisco Small Business Devices Team member.

I recommend you to download the firmware from Cisco URL and upgrade the firmware version on the device.

Then try the below command on switch :

conf t
ip ssh password-auth

It should work in latest firmware version; if it is not running so probably due to lower end model, the command is not available.

Regards,