Hi,
Recently, I've changed my switch from L2 to L3 mode, I did a reset as well, I've some problems with the switch, currently this switch is using with MAC Add lock down for all the ports.
1. I am unable to see which MAC Add that causes the port to lock down, the logs in RAM Memory do show me which port is down and warning but not the MAC Add that causes the port to lock.
2. There is a lot of SNTP-D-NTPBADVER: NTP server version not compatible error. (offline switch)
3. The reason I change this switch to L3 is to become a router itself, I want this switch to do VLAN and route inter-route at the same time, is it possible?
any help is good. thanks.
