SG350-10SFP REBOOT

[monacog1980]

U-Boot 2013.01 (May 31 2018 - 02:38:39) Marvell version: 2014_T3.0_eng_dropv6 2.4.62

resetting ...

[liviu.gheorghe]

Hello @monacog1980 ,

can you elaborate a little more on the problem description? How often has the reboot happened? Any details about the circumstances under which the switch rebooted?

[monacog1980]

Hi Liviu, 

the switch continuously reboots within a few seconds of turning it on.
This the Putty Log

ROS Booton: May 31 2018 02:38:54

Press x to choose XMODEM...
Booting from NAND flash

Running UBOOT...

U-Boot 2013.01 (May 31 2018 - 02:38:39) Marvell version: 2014_T3.0_eng_dropv6 2.4.62

resetting ...

BootROM 1.41
Booting from NAND flash

General initialization - Version: 1.0.0
Serdes initialization - Version: 1.0.2
PEX: pexIdx 0, detected no link
DDR3 Training Sequence - Ver TIP-1.56.0
DDR3 Training Sequence - Switching XBAR Window to FastPath Window
Updated Physical Mem size is from 0x20000000 to 10000000
DDR3 Training Sequence - Ended Successfully
BootROM: Image checksum verification PASSED

ROS Booton: May 31 2018 02:38:54

Press x to choose XMODEM...
Booting from NAND flash

Running UBOOT...

[liviu.gheorghe]

Hi @monacog1980 ,

I agree with @marce1000 - it looks like image the switch is trying to boot is corrupted.

[marce1000]

 - This looks like a corrupted device (and or a corrupt boot image) ; try factory reset , if that does not help  RMA , 

 M.