06-22-2011 12:13 AM
hello everyone,
I have SGE2010 switches and I want to implement Multiple VLAN's. Im a newbie and starting to study VLANS's
I want to implement 5 VLAN's on my test lab network and here as follows:
192.168.1.x default
192.168.2.x
192.168.3.x
192.168.20.x
192.168.100.x
The .1 is exclusively for my test-lab servers.
The .2 is general test-lab Win-XP workstations.
The .3 is general test-lab Win7 worstations
The .20 is general test-lab production worstations
The .100 is for test-lab IP PHONES.
Anyone can give a howto tutorials with screenshots for my study, I'm a newbie with VLAN.
Thanks,
Philip
06-22-2011 10:28 PM
Hi Phillip,
Thank you for your purchase. I created a video on how to VLAN the SGE switch.
The recording can be paused at any time so you can perform the configuration steps on your unit.
It was fun and easy to configure, so follow along and give it a try. There is page sensitive help text built into the switch as well, that will help with questions you may have.
Click here to see the recording
regards Dave
06-25-2011 12:24 AM
Hi David,
Thanks for the response, but the link of the video is not showing and when I click it the web browser nothings appear.
Hope you can give me another link
Regards,
Philip
06-26-2011 02:49 PM
Dear David,
Thanks so much for the video you send me, I thought its not working and its my mistake that im using different system. I manage to watch it from windows and it really helps me a lot understanding the VLAN on my study. David I really want to learn more specially the routing and how does the DHCP relay works with this switch. Hope im not asking to much from you.
Regards,
Philip
06-26-2011 07:39 PM
Hi Philip,
check out the following reply;
https://supportforums.cisco.com/message/3241303#3241303
regards dave
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide