Switches - Small Business

Hello I have firmware 2.0.1.4  for linksys cisco srw224pI want to upgrade the firmware up to 2.0.2.4 but I havan't instruction.help me please, serjssu1980@mail.ru

Hello I have a question on 300 series PoE switch (SRW224G4P, power budget: 180W).How many WAP 4410N can be powered by this switch??How many AP 1242 can be powered by this switch??Since CDP is not supported yet, I think switch will provide 15.4W power...

Hi.  Network scanner has shown that SRW 2048 has 000000000000 MAC. I've checked device information through web access. It showed normal MAC. How I can fix it?This switch has a problem (reason why I started to scan it). When I use 2nd SRW 2048 user PC...

Hi I am setting up a SG300-28p switch connected to a cisco 1801 router The switch is configured with (Data VLAN 1) and (Voice VLAN 100) All equipment in the VLAN1 is assigned DHCP IP(192.168.16.0) address from SBS2008 working fine, VLAN100 IP addre...

Hi!I have Linksys SPS224.I've learnt how to change some parameters through SNMP. But this changes are applying to running-config, and, when switch reboots, all loose.How can I save this changed running-config to startup-config through SNMP?

Are the MFELX1 mini-gbic officially supported on the SR2024T switch? The datasheet http://www.cisco.com/en/US/partner/prod/collateral/switches/ps5718/ps10863/datasheet_C78-582017.html cites only the MGBLH1, MGBSX1, MGBT1, MGBBX1, MGBLX1 so it seems i...

Hi!I have Linksys SPS224Trying to create VLAN through SNMP.Issueing the string to create VLAN ID=100 with name "VLAN100" snmpset -c private -v2c 10.254.2.144 .1.3.6.1.2.1.17.7.1.4.3.1.1.100 s VLAN100 .1.3.6.1.2.1.17.7.1.4.3.1.5.100 i 4It reportsError...

Unable to log in into our new ESW 540 switch because the default User ID and PW was changed.  How do i restore the factory default on the switch.Can't get into the switch with CCA or explorer.

On my Cisco SLM248G Switch the Back pressure and Flow control are currently disable.For the Flow control is it best to set it to enable or just Auto negotations and for the Back pressure is it ok the Enable it.This Cisco Switch has 3 servers and 15 l...

Hi !Does somebody know what is the maximum concurrent TELNET sessions supported by SMB 300 Series Managed Switches ?My searches at Cisco website and configuration/administration guides have been unsuccessful.Thanks,LeonardoPresales Engineer

Hello people,This is my first post and I’d like to say thank you to the people that have responded to other posts in this forum, they’ve helped me get almost everything sorted except for one issue.Attached is a diagram of my setup. What I’m aiming fo...

Can inter VLAN routing be done on SRW (Cisco 300 series) switches ?