08-04-2010 12:51 PM
We are looking to use some SRW2048 in replace of some 2960 switches. Do the SRW2048 support extended vlan ( 1-4094 )
Thanks,
Jason
08-04-2010 09:00 PM
Hi Jason,
The manual does state;
VLAN Management Tab - Create VLAN
The Create VLAN screen provides information and global parameters for configuring and working with VLANs.
VLAN ID (2-4094). Indicates the ID number of the VLAN being configured. Up to 256 VLANs can be created. This
field is used to add VLANs one at a time. To add the defined VLAN ID number, press the Add button.
VLAN Name.
Of course the default VLAN ( VLAN ID=1) is enabled by default on all ports.
Hope that helps
regards Dave
08-04-2010 09:36 PM
It is important to note that the SRW2048 is a layer 2 switch and does not support IP VLAN routing. It
will support VLANs but will not effectively route inbetween them.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide