Troubles with trunking on SG switch

[ehermansen]

Hi,

I am trying to connect two SG switches together with trunk and there are some issues with some of the VLANS.
Two of the VLANS are working; 10 and 99 but the rest of them are not working. 

The models of the switch:
One is: CBS350-24S-4G 24-Port Gigabit SFP Managed Switch 
and the other one is SG350XG-24F 24-Port switch

Active-image: flash://system/images/image1.bin

Version: 2.0.0.73

Active-image: flash://system/images/image1.bin

Version: 3.1.1.7

Config switch 1:
vlan database
vlan 10,20,30,40,50,90,99

Bolig#sh run int gig 27
interface GigabitEthernet27
spanning-tree link-type point-to-point
switchport mode trunk
switchport trunk native vlan 90
switchport trunk allowed vlan 1-2,10,20,30,40,50,90,97-99

Bolig#sh interfaces switchport gig 27

S-VLAN Ethernet Type: 0x8100 (802.1q)

VLAN Mapping Tunnel L2 protocols Global CoS: 5

Name: gi27

Switchport: enable

Administrative Mode: trunk

Operational Mode: up

Access Mode VLAN: 1

Access Multicast TV VLAN: none

Trunking Native Mode VLAN: 90

Trunking VLANs: 1,10,20,30,40,50,90,99

2,97-98 (Inactive)

General PVID: 1

General VLANs: none

General Egress Tagged VLANs: none

General Forbidden VLANs: none

General Ingress Filtering: enabled

General Acceptable Frame Type: all

General GVRP status: disabled

Customer Mode VLAN: none

Customer Multicast TV VLANs: none

Private-vlan promiscuous-association primary VLAN: none

Private-vlan promiscuous-association Secondary VLANs: none

Private-vlan host-association primary VLAN: none

Private-vlan host-association Secondary VLAN: none

Config switch 2

vlan database

vlan 2,10,20,30,40,50,90,97-99

port22

interface tengigabitethernet1/0/22

spanning-tree link-type point-to-point

switchport mode trunk

switchport trunk native vlan 90

macro description switch

!next command is internal.

macro auto smartport dynamic_type switch

--------------------------

G350XG-24F-SW1#sh interfaces switchport TengigabitEthernet 1/0/22

Gathering information...

Name: te1/0/22

Switchport: enable

Administrative Mode: trunk

Operational Mode: up

Access Mode VLAN: 1

Access Multicast TV VLAN: none

Trunking Native Mode VLAN: 90

Trunking VLANs: 1-2,10,20,30,40,50,90,97-99

3-9,11-19,21-29,31-39,41-49,51-89,91-96,100-4094

(Inactive)

General PVID: 1

General VLANs: none

General Egress Tagged VLANs: none

General Forbidden VLANs: none

General Ingress Filtering: enabled

General Acceptable Frame Type: all

General GVRP status: disabled

Customer Mode VLAN: none

Customer Multicast TV VLANs: none

Private-vlan promiscuous-association primary VLAN: none

Private-vlan promiscuous-association Secondary VLANs: none

Private-vlan host-association primary VLAN: none

Private-vlan host-association Secondary VLAN: none

Classification rules:

Classification type Group ID VLAN ID

------------------- -------- ------

[Jitendra Kumar]

Follow blow article..

https://www.cisco.com/c/en/us/support/docs/smb/switches/Cisco-Business-Switching/kmgmt-2237-vlan-configuration-via-cli-on-300-500-series-managed-switche.html

https://www.cisco.com/c/en/us/support/docs/smb/switches/cisco-small-business-300-series-managed-switches/smb4986-vlan-configuration-via-cli-on-300-500-series-managed-switche.html