Can SG-350 enough performance for run Rapid-PVST+ ?

[Ethan and Mia]

Hello I am not sure , Can sg3xx run Rapid-PVST+ , Rapid-PVST use high resource

[balaji.bandi]

SG can handle your requirement, i do not see any issue technically here.

https://www.cisco.com/c/en/us/support/docs/smb/switches/cisco-small-business-300-series-managed-switches/smb4811-rapid-spanning-tree-protocol-rstp-configuration-on-the-300-s.html

[Martin Aleksandrov]

Rapid-PVST+ is supported on SG350 per the datasheet https://www.cisco.com/c/en/us/products/collateral/switches/small-business-smart-switches/data-sheet-c78-737359.html .

[Jitendra Kumar]

Layer 2 Switching
Spanning Tree Protocol	Standard 802.1d Spanning Tree support Fast convergence using 802.1w (Rapid Spanning Tree [RSTP]), enabled by default 8 instances are supported Multiple Spanning Tree instances using 802.1s (MSTP)

[Martin Aleksandrov]

Hello Ethan and Mia,

Starting with firmware release 2.5.0.79 for Sx350 series switches in addition to STP, RSTP, and MSTP, the device supports PVST+ and RPVST+. PVST+ and /RPVST+ run in separate instances of the 802.1Q STP per VLAN. Rapid PVST runs in a separate instance of the 802.1Q RSTP per VLAN. The device supports up to 126 PVST/RPVST instances. There are no known or expected performance issues related to when the RPVST+ protocol on the switch is enabled. 

Thanks