We have a Video intercom that is connected to a SG-300 10p switch.
Connected on GI8
there is a DSL connection on GI10.
A 2960 switch on the other side of the DSL.
Then another SG300-10p.
The vendor of the video intercom I s AIPHONE.
the Q&A fact sheet says if call ok but video not then the issue is multicasting needs to be enabled.
So this is what I did on both of the SG300
under multicast -> properties -> bridge multicast filtering status ( checked enabled )
VLAN id ( VLAN the devices are in )
left all else as default.
When I look at the interface counters I see multicast packets on the interface that the video intercom is on .
I see this on both switches. ( SG300's ) on the ports where the AIPhone's are connected and also on the interface that connects the SG300's to the 2960.
On the 2960 I see multicast packets on the interface to the SG300's
on the 2960 I also see the multicast packets on the interface to the DSL.
Yet not working ?
any ideas ???
