VLAN. TRUNKING. BETWEEN. CISCO AND jUNIPER

[kwanshe01]

Hello. All, Please can. Anyone show or explain to me how to trunk vlan traffic from my new cisco sf300 switch to the exesiting juniper EX2200 switch. Your inputs are highly appreciated.

[devils_advocate]

I have not used any Juniper kit before so my answer will be for the Cisco side.

Firstly you need to make the port a Trunk port.
(Vlan Management > Interface Settings)

Then you set the native vlan to be untagged. 
​(Vlan Management > Port to Vlan)

Then you tag any Vlans which you want to allow across the trunk.
​(Vlan Management > Port to Vlan)

It literally is as easy at that,