I have unmanagaed and managed switches and I am trying to get a few VLANs set up.
In question is VLAN 7 (10.0.6.0), default is VLAN 1 (10.0.0.0)
VLAN 7 includes our surveillance equipment
Devices on VLAN 7
POE unmanaged switch with cameras patched to
HP 1910 (10.0.0.99) Untagged port 9
HP 1910 (10.0.0.99) Tagged port 25
Fiber run to
HP1910 (10.0.0.100) Tagged port 25
HP1910 (10.0.0.100) Untagged Port 12
Copper Patch to
Cisco SG500 (10.0.0.18 : 2/1) Untagged PVID port 3
Cisco SG500 (10.0.0.18 : 2/1) Tagged port 7
Copper patch to POE Unmanaged switch with other cameras and controller
Cisco SG500 (10.0.0.18 : 2/1) Tagged port 31
Copper patch to POE Unmanaged switch with other cameras and controller
We have 4 stacked SG500's - all video runs through the second switch in the stack.
The cameras in question are at the rear of the building and run through the managed switches - these are not showing up on the controller. All other cameras are patched into the unmanaged switches.
I have other projects running and am focused on them, but I have one manager who wants to watch people on the internal cameras. Not a priority for me, but hourly reminders that he can't see people gets old.
