11-10-2017 06:05 AM - edited 03-08-2019 12:41 PM
Hey guys!
I need your kind support, we have a device (camera) with an interface FastEthernet. the conections is like this:
Camera->Media Converter->Single Mode Fiber->(Gbic 1000) GLC-LH-SM-> Cisco 3850 XS interface
But to try change the speed in interface its denied.
Any sugesstions?
11-10-2017 06:52 AM
Which interface are you using ? Post the output of 'show interface' of the interface where you are trying to change the speed...
11-10-2017 10:00 AM - edited 11-10-2017 10:05 AM
On newer devices for SFP ports there is no speed command for manually configuring interface speed (except speed nonegotiate). 100Mb speed is not supported on SFP ports on 3850 XS - except for module GLC-GE-100FX.
11-10-2017 10:29 AM
You optic is a gig optic (Gbic 1000) GLC-LH-SM) and can't be change to 100Mb. If you want to use it as 100Mb, than you need to change your optic.
hth
04-23-2019 02:50 AM
We have an connectivity issue with cisco 3850 fibers switch with sfp and 100mbps fiber camera sfp.
One end we are using WS-C3850-48xs with sfp GLC-GE-DR-LX and other end we have siqura fiber camera with 100 mbps sfp.we cant able to establish connection. Kindly support
04-23-2019 02:55 AM
05-01-2019 06:21 AM - edited 05-01-2019 06:25 AM
as per above list only available 100 mbps speed sfp in multimode fiber.but we are using single mode fiber.
is there any supported 100mbps sfp available in single mode or we have sfp GLC-LH-SMD it will support or we can reduce the speed?
connection detail: siqura outdoor camera with 100mbps builtin sfp----}single mode fo cable--}cisco ws-c3850-48xs-e with GLC-LH-SMD sfp
please help
05-01-2019 07:29 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide