cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
501
Views
0
Helpful
2
Replies

1700 WCCP Issues

xr5054yz85
Level 1
Level 1

I am having some issues with WCCP and squid, and have almost tried every tutorial on the internet. Here is the one that I am currently working with. http://bryceporter.info/?q=node/11 I cannot get this to work, and I am thinking that the router is not communicating with my Ubuntu box properly. The weird thing is that all my show WCCP's come back with no information, and are attached below. If anyone would be able to help me with getting a squid server and WCCP on my router up I would greatly appreciate it!! Thanks for all the help in advance!

Here is my sh run, and below it some show WCCP's.

Current configuration : 1190 bytes
!
version 12.3
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname 1700
!
boot-start-marker
boot-end-marker
!
enable secret 5 $1$KcV7$wwTKv7hIN7.WHpmQc936m.
enable password aplus
!
memory-size iomem 20
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
no aaa new-model
ip subnet-zero
ip wccp web-cache redirect-list WCCP_Redirect
ip cef
!
!
!
ip dhcp pool DHCP
   network 10.10.0.0 255.255.255.0
   dns-server 8.8.8.8 4.2.2.2
   default-router 10.10.0.1
!
ip name-server 8.8.8.8
ip name-server 4.2.2.2
no ftp-server write-enable
!
!
!
!
interface Ethernet0
ip address dhcp
ip nat outside
ip wccp web-cache redirect out
half-duplex
!
interface FastEthernet0
ip address 10.10.0.1 255.255.255.0
ip nat inside
speed auto
full-duplex
!
ip nat inside source list 1 interface Ethernet0 overload
ip classless
ip route 0.0.0.0 0.0.0.0 Ethernet0
no ip http server
!
ip access-list extended WCCP_Redirect
deny   ip host 10.10.0.253 any
permit ip any any
!
access-list 1 permit 192.168.1.0 0.0.0.255
access-list 1 permit 10.10.0.0 0.0.0.255
!
line con 0
line aux 0
line vty 0 4
password aplus
login
!
!
end

1700#sh ip wccp web-cache view
    WCCP Routers Informed of:
        -none-

    WCCP Cache Engines Visible:
        -none-

    WCCP Cache Engines NOT Visible:
        -none-

1700#sh ip wccp web-cache detail
        No information is available for the service.

1700#sh ip wccp web-cache
Global WCCP information:
    Router information:
        Router Identifier:                   -not yet determined-
        Protocol Version:                    2.0

    Service Identifier: web-cache
        Number of Cache Engines:             0
        Number of routers:                   0
        Total Packets Redirected:            0
        Redirect access-list:                WCCP_Redirect
        Total Packets Denied Redirect:       0
        Total Packets Unassigned:            0
        Group access-list:                   -none-
        Total Messages Denied to Group:      0
        Total Authentication failures:       0

2 Replies 2

xr5054yz85
Level 1
Level 1

Anyone able to help me or advise me at all. I would really appreciate it!!! Thanks so much for

reading and trying.

I really need some help with this. Does anyone know where I could get some help, or who I could get int contactg with that would be able to help me out with this?

Thanks again for trying.

Review Cisco Networking products for a $25 gift card