2 Gateway on the one LAN

[dagoma999]

I have this situation:

remote LAN 192.168.2.xxx

local LAN 192.168.5.xxx

i want internet for remote LAN.

which routing table it would transfer all traffic of the VPN to the GW 192.168.5.75?
if I use the routing table of the picture, I get no problems 8.8.8.8 through Gw 192.168.5.75. I would like to have the default Toward that GW stable for the VPN and then I wish all VPN traffic is then routed to the GW 192.168.5.75? how to do?

[Markus Benz]

Hi,

I am sorry, but I do not fully understand you're requirement.

Could you describe in more detail what you want to do?
Currently you're routing all traffic to 69.38.2.254 except traffic for 8.8.8.8 is routed to 192.168.5.75.

If you want to route all traffic to 192.168.5.75 you need to replace your default route on Router 1with the following:

ip route 0.0.0.0 0.0.0.0 192.168.5.75

and you add an other one for the remote network:

ip route 192.168.2.0 255.255.255.0 69.38.2.254

Is that what you want to achieve?

Regards,
Markus