07-09-2012 10:45 AM - edited 03-07-2019 07:40 AM
I have a 2600 router and im trying to set it up for SDM. The crypto command is not there. What do i do? HELP!!!
show version
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-J1S3-M), Version 12.3(15b), RELEASE SOFTWARE (fc1 )
Copyright (c) 1986-2005 by cisco Systems, Inc.
Compiled Thu 25-Aug-05 13:38 by ssearch
Image text-base: 0x80008098, data-base: 0x81A255C4
ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
Testrouter uptime is 3 hours, 10 minutes
System returned to ROM by reload
System restarted at 10:39:39 UTC Mon Jul 9 2012
System image file is "flash:c2600-j1s3-mz.123-15b.bin"
cisco 2621 (MPC860) processor (revision 0x102) with 61440K/4096K bytes of memory .
Processor board ID JAB041306F1 (1510524708)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
TN3270 Emulation software.
2 FastEthernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
07-09-2012 11:02 AM
Do i update the IOS to a version that has the crypto command on there, or is there another way to configure SSH in the router?
07-09-2012 11:05 AM
Your image is "Enterprise Basic" (j1s3), that doesn't include any crypto. For crypto you need a k8 or k9-image.
07-09-2012 11:16 AM
thanks for the info.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: