2811 multiple vpn?

[T1success]

Hi all

Pls i have a router which has ipsec and isakmp already configured with a ppp link .

My questions is can i do multiple vpn with the 2811 series ?

The model of the router is stated below

"

Cisco 2811 (revision 53.51) with 249856K/12288K bytes of memory.

Processor board ............

6 FastEthernet interfaces

1 Virtual Private Network (VPN) Module

DRAM configuration is 64 bits wide with parity enabled.

239K bytes of non-volatile configuration memory.

62720K bytes of ATA CompactFlash (Read/Write)

Configuration register is 0x2102"

I want to do vpn over the internet .can the 2811 do it ?

Pls i will appreciate your detailed reply .

[Richard Burts]

Taiwo

Perhaps there is some aspect of your question that I do not understand. But the 2811 can certainly do VPN over the Internet (assuming that it has the right feature set to support VPN - which yours does if it is already running IPSec with ppp link.

I have done IPSec VPN over the Internet with 2800 series routers and they work very well for it.

HTH

Rick

[american1]

You can have multiple crypto maps configured with associated ISAKMP references. As long as you configure these correctly you shouldn't have a problem.