2911 BVI Note

[johnlloyd_13]

hi all,

i've encountered this log on a 2911 router.

i'm configuring the LAN sub-interfaces to a BVI interface.

is this something we just ignore or anything i need to further configure?

Router(config-subif)#
*May 23 06:39:25.111:
Note: A random Spanning Tree Bridge Identifier address of 0000.0ca4.b2d0
      has been chosen for Bridge Group 2 since the selected mac address
      is already being used by Bridge Group 3.
*May 23 06:39:25.111:
      Ensure that this address is unique.

[Richard Burts · Accepted solution]

I would consider that message to be informational and would not think it needs further configuration.

HTH

Rick

[johnlloyd_13]

hi rick,

i suspect that as well. i still went ahead completing the router config.

thanks for confirming!