12-21-2007 08:07 AM - edited 03-05-2019 08:07 PM
I want to know what are the comands to setup a port on a old CATO's switch with the following information:
switchport access vlan XX
switchport mode access
no cdp enable
spanning-tree portfast
I can do that on a IOS, but I am strugling on the old system.
12-21-2007 08:14 AM
Hi
switchport access vlan XX =
set vlan XX "port number"
switchport mode access =
no real equivalent really. All ports are access ports unless you set them up as trunks.
no cdp enable =
set cdp disable ( you can use this globally or on ports )
spanning-tree portfast =
set spantree portfast "port number"
HTH
Jon
12-21-2007 08:36 AM
Jon,
Thanks for the quick reply. it works fine
TD
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide