cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

772
Views
0
Helpful
22
Replies
Hall of Fame Master

2951 Routing Issues

Jason

Sorry that did not fix the issue. Perhaps when you are ready to work on this again it might help to give us some understanding of how things were/are that is working and what you are changing to that is not working.

HTH

Rick

Hall of Fame Master

2951 Routing Issues

Jason

It was late when the thought occurred to me that the  problem might be address translation and I posted my suggestion about  doing translation. In the clarity of morning when I look at my  suggestion I see a flaw in what I suggested. In addition to those  commands you should also do

interface gig0/0

ip nat outside

interface gig0/1

ip nat inside

interface gig0/2

ip nat inside

When you get a chance to get back to it give this a try and let us know if it helps.

HTH

Rick

Beginner

2951 Routing Issues

Rick,

Thank you I will give that a try as soon as I can. In the mean time, here's a quick drawing of how we are now and what I'm trying to do.

Hall of Fame Master

2951 Routing Issues

Jason

Thanks for the drawing. I have a couple of questions  based on that but probably should wait until you are ready to work on  this again to get into them (especially when we know whether the revised  address translation is helpful).

HTH

Rick

Beginner

Re: 2951 Routing Issues

Few things that erupted in my mind...

- Lets assume the translation is happening correctly  then are you able to ping the outside world from your router if  interface gig0/1 or 0/2 is chosen as source?

Whats the result of this ---- # ping 8.8.8.8 source gig 0/1

Also, would suggest you to remove these two lines from the config if you are not using these features -

# ip source-route

# ip forward-protocol nd

Negate the above commands if these features aren't used and let us know if there is any difference.

Regards,

Talha.

Beginner

Re: 2951 Routing Issues

ping 8.8.8.8 source gig0/2 --- Does not work.

negated the commands:

# ip source-route

# ip forward-protocol nd

above ping still does not work.

Highlighted
Beginner

Re: 2951 Routing Issues

If that is not working then try the extended ping.

# ping      ---- hit enter

.

.

Target IP Address : 8.8.8.8

.

.

Extended Command : Y

.

.

Source Address Or Interface : gigabitethernet0/2 ---- or type in the gig 0/2 interface ip address

.

.


After negating the said commands are you able to ping all the router interfaces from your desktop?

Regards,

Talha

Beginner

Re: 2951 Routing Issues

Did not work.

CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards