2960L WebInterface seems damaged after update

[beamer345]

Hello All,

I´ve updated an 2960L-8PS-LL switch using the WebInterface (GENERAL SETTINGS -> SOFTWARE UPDATE).

Using the file:   c2960l-universalk9-tar.152-6.E.tar

After update (It informs: "successfully" / "restart") the WebInterface seems damaged (see attached photo).

In Console:

old SW version:  

BOOTLDR: C2960L Boot Loader (C2960L-HBOOT-M) Version 15.2(5r)E1, RELEASE SOFTWARE (fc2)

System image file is "flash:c2960l-universalk9-mz.152-5c.E/c2960l-universalk9-mz.152-5c.E.bin"

new SW version:

BOOTLDR: C2960L Boot Loader (C2960L-HBOOT-M) Version 15.2(5r)E3, RELEASE SOFTWARE (fc2)

System image file is "flash:c2960l-universalk9-mz.152-6.E/c2960l-universalk9-mz.152-6.E.bin"

Any suggestions ?

It is not possible to start the update again, because the WebInterface does´nt work.

Is there another way to upgrade?

which version suggested to use?

     BR,  Beamer

[beamer345 · Accepted solution]

It´s me again,

it seems this was a Browser-Cache (Chrome) problem.

With other Browser (IE) and after deleting Cache (Chrome) it works.