I have an issue with Netflow lite when testing it on a 2960X.
It seems that no flows are send to my collector.
Below the relevant config and som show outputs.
Can someone see what I did wrong or guid me to find a solution?
flow record record1 match ipv4 protocol match ipv4 source address match ipv4 destination address match transport source-port match transport destination-port collect interface input collect counter bytes long collect counter packets long collect timestamp sys-uptime first collect timestamp sys-uptime last ! ! flow exporter export1 destination 10.10.10.130 template data timeout 60 ! ! flow monitor monitor1 record record1 exporter export1 cache timeout inactive 120 cache timeout active 300
sampler sampler1 mode random 1 out-of 100
interface GigabitEthernet1/0/1 ip flow monitor monitor1 sampler sampler1 input
test-2960#show ip flow export Flow export v1 is disabled for main cache Version 1 flow records 0 flows exported in 0 udp datagrams 0 flows failed due to lack of export packet 0 export packets were sent up to process level
test-2960#show ip flow export template No Template export information No Option Templates exist Template Options Flag = 0 Total number of Templates added = 0 Total active Templates = 0 Flow Templates active = 0 Flow Templates added = 0 Option Templates active = 0 Option Templates added = 0 Template ager polls = 0 Option Template ager polls = 0 Main cache version 9 export is disabled
test-2960#show flow exporter Flow Exporter export1: Description: User defined Export protocol: NetFlow Version 9 Transport Configuration: Destination IP address: 10.10.10.130 Source IP address: 10.10.10.134 Transport Protocol: UDP Destination Port: 9995 Source Port: 53881 DSCP: 0x0 TTL: 255 Output Features: Not Used
“Use Serviceability Features to Troubleshoot your Cat9K as a Cisco TAC Engineer”
This special event is open only to Cisco Customers and Partners.
Many pages in the Cisco Community are accessible only to Cisco customers, partners, or logged in ...
Cisco Champion Radio · S7|E40 From SD-WAN to SASE: Speed Up and Secure SaaS Internet Apps
The changing global environment has transformed how enterprise users connect to applications. The SASE architecture delivers important networking and securit...
Hi guys,Have a question regarding spanning tree and way its supposed to work when there is a redundant path in fiber daisy-chained switches. Root switch for all vlans is connected via fiber link to the first of the daisy-chained switches. Below is same co...
Hi Experts, I am designing a Ring topology to connect all all DRs and back to CR sites. Do I need to consider what is the maximum DRs which I am able to connect in the Ring and I am thinking does the latency will be affected if more sites will j...
HiI have an issue with a pppoe command in a subinterface. I'm using a c1841-advipservicesk9-mz.124-25f.bin IOSand I have a problem with the command pppoe-client dial-pool-number6. I can configure in a interface but I can't in a subinterface. Any...