12-11-2013 02:36 AM - edited 03-07-2019 05:01 PM
Hi Everyone,
I have an issue with Netflow lite when testing it on a 2960X.
It seems that no flows are send to my collector.
Below the relevant config and som show outputs.
Can someone see what I did wrong or guid me to find a solution?
Thanks!
flow record record1
match ipv4 protocol
match ipv4 source address
match ipv4 destination address
match transport source-port
match transport destination-port
collect interface input
collect counter bytes long
collect counter packets long
collect timestamp sys-uptime first
collect timestamp sys-uptime last
!
!
flow exporter export1
destination 10.10.10.130
template data timeout 60
!
!
flow monitor monitor1
record record1
exporter export1
cache timeout inactive 120
cache timeout active 300
!
!
sampler sampler1
mode random 1 out-of 100
interface GigabitEthernet1/0/1
ip flow monitor monitor1 sampler sampler1 input
Show commands:
test-2960#show ip flow export
Flow export v1 is disabled for main cache
Version 1 flow records
0 flows exported in 0 udp datagrams
0 flows failed due to lack of export packet
0 export packets were sent up to process level
test-2960#show ip flow export template
No Template export information
No Option Templates exist
Template Options Flag = 0
Total number of Templates added = 0
Total active Templates = 0
Flow Templates active = 0
Flow Templates added = 0
Option Templates active = 0
Option Templates added = 0
Template ager polls = 0
Option Template ager polls = 0
Main cache version 9 export is disabled
test-2960#show flow exporter
Flow Exporter export1:
Description: User defined
Export protocol: NetFlow Version 9
Transport Configuration:
Destination IP address: 10.10.10.130
Source IP address: 10.10.10.134
Transport Protocol: UDP
Destination Port: 9995
Source Port: 53881
DSCP: 0x0
TTL: 255
Output Features: Not Used
test-2960#show flow exporter statistics
Flow Exporter export1:
Packet send statistics (last cleared 1w1d ago):
Successfully sent: 0 (0 bytes)
Enqueued to process level: 13823 (1342365 bytes)
Client send statistics:
Client: Flow Monitor monitor1
Records added: 20
- sent: 20
Bytes added: 820
- sent: 820
12-11-2013 07:23 AM
Here is a config that worked with the 2960x switch that Cisco sent us for testing:
http://www.plixer.com/blog/netflow-lite-2/cisco-2960-x-netflow-lite-configuration/
Jake
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide