3560 Etherchannel Ports are orange

[dbuckley77]

We have an etherchannel setup between tow 3560's, two ports on each switch.

It seems to be working but the lights on one switch are orange instead of green.

What does this indicate?

[Leo Laohoo]

Post the complete output to the command "sh etherchan summary".

[dbuckley77]

This is the output from the switch with the orange ports.

DPW-SAN2-3560#sh etherchannel  sum
Flags:  D - down        P - bundled in port-channel
        I - stand-alone s - suspended
        H - Hot-standby (LACP only)
        R - Layer3      S - Layer2
        U - in use      f - failed to allocate aggregator

        M - not in use, minimum links not met
        u - unsuitable for bundling
        w - waiting to be aggregated
        d - default port


Number of channel-groups in use: 1
Number of aggregators:           1

Group  Port-channel  Protocol    Ports
------+-------------+-----------+-----------------------------------------------
4      Po4(SU)         PAgP      Gi0/1(P)    Gi0/3(P)    

DPW-SAN2-3560#

[Leo Laohoo]

Looks good to me.

[johnlloyd_13]

hi,

the amber/orange ports are usually speed/duplex mismatch.

make sure the settings are the same on both devices.

[vbreil]

execute Shut/no shut on the portchannel interface