cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1468
Views
0
Helpful
2
Replies

3560 v2 Access

nshoe18
Level 1
Level 1

I have a 3560 v2 switch that has an issue with AAA and I cannot get to a login prompt. I just keep getting Authentication Failed. How do you reset this thing to factory defaults when you cannot get into it?

2 Replies 2

I have tried this procedure multiple times. This is a new 3560v2 switch. The light never goes solid green. After pressing the button until it blinks green to amber repeating I get this on the screen:

Using driver version 1 for media type 1

Base ethernet MAC Address: b4:14:89:86:4b:00

Xmodem file system is available.

The password-recovery mechanism is enabled.

Initializing Flash...

mifs[2]: 0 files, 1 directories

mifs[2]: Total bytes     :    3870720

mifs[2]: Bytes used      :       1024

mifs[2]: Bytes available :    3869696

mifs[2]: mifs fsck took 1 seconds.

mifs[3]: 391 files, 7 directories

mifs[3]: Total bytes     :   27998208

mifs[3]: Bytes used      :   24664064

mifs[3]: Bytes available :    3334144

mifs[3]: mifs fsck took 8 seconds.

...done Initializing Flash.

done.

Loading "flash:c3560-ipbasek9-mz.122-55.SE.bin"...@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

I have tried ctrl-break, ctrl-c, etc. and cannot seem to get the boot procedure to breakout.