09-15-2015 02:20 PM - edited 03-08-2019 01:47 AM
I have a C3560E switch that is giving me some POE issues. It is providing power to a handful of Cisco phones and an access point. If I unplug a phone and plug it back in it does not receive power. New devices also do not receive power. Another strange this is one of the ports was showing it had a device connected to it (IEEE PD) drawing 12W of power but there was nothing plugged into that port. I have plenty of remaining power to be able to handle new devices.
09-15-2015 02:29 PM
Can you please post the following output:
1. sh version;
2. sh power inline; and
3. sh interface <BLAH>
09-15-2015 02:37 PM
sh version:
ROM: Bootstrap program is C3560E boot loader
BOOTLDR: C3560E Boot Loader (C3560X-HBOOT-M) Version 15.2(3r)E, RELEASE SOFTWARE (fc1)
xxxxxxx uptime is 6 weeks, 4 days, 8 hours, 55 minutes
System returned to ROM by power-on
System restarted at 05:39:42 MST Fri Jul 31 2015
System image file is "flash:/c3560e-ipbasek9-mz.150-2.SE7/c3560e-ipbasek9-mz.150-2.SE7.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
License Level: ipbase
License Type: Permanent
Next reload license Level: ipbase
cisco WS-C3560X-48P (PowerPC405) processor (revision W0) with 262144K bytes of memory.
Processor board ID FDO1918F240
Last reset from power-on
3 Virtual Ethernet interfaces
1 FastEthernet interface
52 Gigabit Ethernet interfaces
2 Ten Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.
512K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : XXXXXXX
Motherboard assembly number : 73-15481-01
Motherboard serial number : FDOXXXXXXX
Model revision number : W0
Motherboard revision number : A0
Model number : WS-C3560X-48PF-S
Daughterboard assembly number : 800-32786-02
Daughterboard serial number : FDOXXXXXXX
System serial number : FDOXXXXXXX
Top Assembly Part Number : 800-38995-01
Top Assembly Revision Number : A0
Version ID : V07
CLEI Code Number : CMMPTXXXXX
Hardware Board Revision Number : 0x05
Switch Ports Model SW Version SW Image
------ ----- ----- ---------- ----------
* 1 54 WS-C3560X-48P 15.0(2)SE7 C3560E-IPBASEK9-M
sh power inline
Available:847.0(w) Used:68.0(w) Remaining:779.0(w)
Interface Admin Oper Power Device Class Max
(Watts)
--------- ------ ---------- ------- ------------------- ----- ----
Gi0/1 auto off 0.0 n/a n/a 30.0
Gi0/2 auto off 0.0 n/a n/a 30.0
Gi0/3 auto off 0.0 n/a n/a 30.0
Gi0/4 auto off 0.0 n/a n/a 30.0
Gi0/5 auto off 0.0 n/a n/a 30.0
Gi0/6 auto off 0.0 n/a n/a 30.0
Gi0/7 auto off 0.0 n/a n/a 30.0
Gi0/8 auto off 0.0 n/a n/a 30.0
Gi0/9 auto off 0.0 n/a n/a 30.0
Gi0/10 auto off 0.0 n/a n/a 30.0
Gi0/11 auto off 0.0 n/a n/a 30.0
Gi0/12 auto off 0.0 n/a n/a 30.0
Gi0/13 auto off 0.0 n/a n/a 30.0
Gi0/14 auto off 0.0 n/a n/a 30.0
Gi0/15 auto off 0.0 n/a n/a 30.0
Gi0/16 auto on 12.0 IP Phone 7945 3 30.0
Gi0/17 auto off 0.0 n/a n/a 30.0
Gi0/18 auto off 0.0 n/a n/a 30.0
Gi0/19 auto off 0.0 n/a n/a 30.0
Gi0/20 auto off 0.0 n/a n/a 30.0
Gi0/21 auto off 0.0 n/a n/a 30.0
Gi0/22 auto off 0.0 n/a n/a 30.0
Gi0/23 auto off 0.0 n/a n/a 30.0
Gi0/24 auto off 0.0 n/a n/a 30.0
Gi0/25 auto off 0.0 n/a n/a 30.0
Gi0/26 auto off 0.0 n/a n/a 30.0
Gi0/27 auto off 0.0 n/a n/a 30.0
Gi0/28 auto off 0.0 n/a n/a 30.0
Gi0/29 auto on 12.0 IP Phone 7945 3 30.0
Gi0/30 auto on 12.0 IP Phone 7945 3 30.0
Gi0/31 auto off 0.0 n/a n/a 30.0
Gi0/32 auto off 0.0 n/a n/a 30.0
Gi0/33 auto on 12.0 IP Phone 7945 3 30.0
Gi0/34 auto off 0.0 n/a n/a 30.0
Gi0/35 auto off 0.0 n/a n/a 30.0
Gi0/36 auto off 0.0 n/a n/a 30.0
Gi0/37 auto off 0.0 n/a n/a 30.0
Gi0/38 auto off 0.0 n/a n/a 30.0
Gi0/39 auto off 0.0 n/a n/a 30.0
Gi0/40 auto off 0.0 n/a n/a 30.0
Gi0/41 auto off 0.0 n/a n/a 30.0
Gi0/42 auto off 0.0 n/a n/a 30.0
Gi0/43 auto off 0.0 n/a n/a 30.0
Gi0/44 auto off 0.0 n/a n/a 30.0
Gi0/45 auto off 0.0 n/a n/a 30.0
Gi0/46 auto off 0.0 n/a n/a 30.0
Gi0/47 auto off 0.0 n/a n/a 30.0
Gi0/48 auto on 20.0 AIR-LAP1252AG-A-K9 3 30.0
sh interface (this is of one with a phone plugged in but power not being delivered)
GigabitEthernet0/6 is down, line protocol is down (notconnect)
Hardware is Gigabit Ethernet, address is e865.4913.1e06 (bia e865.4913.1e06)
Description: XXXXXXX
MTU 1500 bytes, BW 10000 Kbit/sec, DLY 1000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Auto-duplex, Auto-speed, media type is 10/100/1000BaseTX
input flow-control is off, output flow-control is unsupported
ARP type: ARPA, ARP Timeout 04:00:00
Last input never, output never, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts (0 multicasts)
0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 watchdog, 0 multicast, 0 pause input
0 input packets with dribble condition detected
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 5 interface resets
0 unknown protocol drops
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier, 0 pause output
0 output buffer failures, 0 output buffers swapped out
09-16-2015 12:49 AM
Do this:
1. Command: test cable tdr int g 0/6;
2. Wait for approximately 61 seconds;
3. Command: sh cable tdr int G 0/6;
4. Post the output to #3.
09-16-2015 07:25 AM
Interface Speed Local pair Pair length Remote pair Pair status
--------- ----- ---------- ------------------ ----------- --------------------
Gi0/6 auto Pair A N/A N/A Normal
Pair B N/A N/A Normal
Pair C N/A N/A Normal
Pair D N/A N/A Normal
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide