03-12-2011 06:12 AM - edited 03-06-2019 04:03 PM
HI Folks
I considered 3750-E with 10GB for server based Rack but in the 10GB Port I M confused regarding the Module,i considered the X2-10GB-SR but what type of cable should i use to connected to the 10GB Port on the core.rack away from the core 25 mtr,pls Advise
03-12-2011 07:25 AM
If the distance is only 25 meters, then use X2-10GB-SR with MM cable. The connector type on the Cisco Switch is SC, so you need to find out what type connector you need for the server side.
03-12-2011 08:42 AM
Hi Riza
from the server side the connectivity its over copper 1000 to the 3750-E,while form the 3750-E TO the core its SC/SC ,am i right riza?
03-12-2011 11:38 AM
Correct, SC/SC patch cord with Multimode X2 optic and Copper Gig on the server side
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide