03-20-2007 07:10 PM - edited 03-05-2019 03:01 PM
does the ip-base image do inter-vlan routing, or do i need the ip-services image?
03-20-2007 10:47 PM
Hi Matt,
I checked on Cisco Feature Navigator tool and found that IEEE 802.1Q VLAN Trunking feature is supported with IP BASE in your 3750 switch.
http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp
Here is a good document about inter-vlan routing:
http://www.cisco.com/en/US/tech/tk389/tk815/technologies_configuration_example09186a008015f17a.shtml
Hope it helps!
Regards,
Juan
03-21-2007 06:31 AM
IP base supports static routing, RIPv1 and RIPv2. Any other routing protocol requires IP Services.
HTH and please rate.
03-21-2007 09:54 AM
Hi
Sure they will do.
Just make sure to give "ip routing" and ip address to all vlans.
Regards
JD
03-22-2007 03:39 PM
IP-base support RIP og static routing.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide