09-24-2009 06:59 AM - edited 03-06-2019 07:52 AM
Hello All - I currently have a 3750 stack which is comprised of
1- WS-C3750G-48PS-E
2- WS-C3750G-48PS-S
3- WS-C3750G-48PS-S
I am planning on removing the two "WS-C3750G-48PS-S" switches from this stack and adding one
WS-C3750G-48PS-E switch into existing switch stack.
The steps I plan on taking to complete this intigration are list below
1- Shut down and remove stackwise cable from existing standard switches
2- make sure the IOS code matches the existing WS-C3750G-48PS-E switch and connect stackswise cables
3- Change the switch priority of the new switch to "1".
Is there anything else I need to consider when doing this reconfiguration?
Solved! Go to Solution.
09-24-2009 08:46 AM
Hello Daniel,
it looks like correct only at step 1 may be easier to switch off the switch you are going to remove.
Another possible option is to provision the new switch before connecting it to current master.
see
or
Hope to help
Giuseppe
09-24-2009 08:46 AM
Hello Daniel,
it looks like correct only at step 1 may be easier to switch off the switch you are going to remove.
Another possible option is to provision the new switch before connecting it to current master.
see
or
Hope to help
Giuseppe
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide