3750x stack issue adding additional unit

[Lee Dress]

I have a 3750X stack with 2 48 port members that have been up and running for over a year without issue.

I'm trying to add a new 24 port 3750X. I've made sure the priority is correct, and I've added a provision for the new member in the stack.

they are all running the exact same version of IOS.

I think the problem is, the version of the stack.  the existing stack states it is version 1.45, while the new member states it is version 6.45

According to what I've read, the way to upgrade the stack version is to upgrade the IOS, but the IOS is already at the version of the new member.

I've not tried to reboot the existing stack because it's in high usage production.

here's the data I think is relevant. if anyone has a clue or needs more info, let me know.

Here's the existing stack:

The System image file is "flash:/c3750e-universalk9-mz.122-55.SE5/c3750e-universalk9-mz.122-55.SE5.bin"

BOOTLDR: C3750E Boot Loader (C3750X-HBOOT-M) Version 12.2(53r)SE2, RELEASE SOFTWARE (fc1)

                 Stack State Machine View

==============================================================

Switch   Master/   Mac Address          Version    Current
Number   Member                          (maj.min)  State
-----------------------------------------------------------
1        Master    7cad.74eb.3300          1.45        Ready
2        Member    bc16.656a.5a80          1.45        Ready

Here's the new Member:

System image file is "flash:/c3750e-universalk9-mz.122-55.SE5/c3750e-universalk9-mz.122-55.SE5.bin"

BOOTLDR: C3750E Boot Loader (C3750X-HBOOT-M) Version 12.2(58r)SE1, RELEASE SOFTWARE (fc1)

                 Stack State Machine View
==============================================================

Switch   Master/   Mac Address          Version    Current
Number   Member                          (maj.min)  State
-----------------------------------------------------------
3        Master    e4c7.22a1.f400          6.45        Ready

[paul driver]

Hello

Does it have the same feature set as the existing stack?
 

What issues are you experiencing?

res

Paul

[Lee Dress]

maybe that is my issue.

the stack is ipbase, and the new unit is lanbase

is there a way to switch that?

[paul driver]

Hello

Yes instlall the Lan base ios off the exisitng stack or download from CCO

res

Paul

[Lee Dress]

I actually need the IP Base because this stack does routing.

I think I need a license upgrade on the new switch.

I'm looking into it now.