01-04-2015 03:04 PM - edited 03-07-2019 10:04 PM
Hello,
I've dug here and else where but have not found a working answer to this. I have two WS-C3750X-24P-S 's both were shipped at the same time, same code.
Switch A - in production for a year + with 12.2(55) SE3 code and a upgraded license to ip services so it would do all the routing.
Switch B - around 16 months of running on switch A, switch B (Lanbase) was stacked in to expand, the ios versions did their syncing, the stack join worked and the was ready to roll within a hour.
About 7months later - roughly 3 weeks ago I was seeing some high cpu utilization and it was suggested that the sdm prefer be changed from default to routing which required reboot. Upon reboot the Switch B did not come back up. Come to find out one switch showed "STACKMGR-5-MAJOR_VERSION_MISMATCH" which is true, Switch A is 1.57, Switch B is 6.57.
I have 10 more of these same models doing routing with Ip base, 2 of the 48 port versions doing routing (ip base) and a dozen or more others (lan base) just as access level, Switch B is the only one I've found so far that anything but 1.57.
I upgraded them Friday to the 15.2(3)E code, no change. How can I get B to be a 1.57?
Thanks
Mike
Solved! Go to Solution.
01-05-2015 02:21 PM
Look at the output to the command "sh license" of switch "B". The EULA license is NOT accepted so you can't use this. Accept the EULA license, reboot the switch and it should be fine.
01-04-2015 05:54 PM
Can you please post the complete output to the following commands:
1. sh version; and
2. sh license
01-05-2015 07:28 AM
01-05-2015 02:21 PM
Look at the output to the command "sh license" of switch "B". The EULA license is NOT accepted so you can't use this. Accept the EULA license, reboot the switch and it should be fine.
01-06-2015 12:54 PM
Thank you very much for taking the time to rate our posts. :)
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide