3850 Switch- reload packages.conf after every boot

[ashidiablo]

As the title states, after every reboot or power outage our distribution switch that trunks to multiple buildings fails after a reboot or a power outage. I will usually have to go in-person and console in and type in "boot flash:packages.conf" to bring the switch back up. I believe it may be a variable not set, but no idea what to type in IOS to prevent this from happening again. Any help or guidance would be appreciated.

[ashidiablo]

output of dir:

Directory of flash:/

56562 -rwx 2097152 Jul 23 2023 18:13:29 +00:00 nvram_config
56564 -rw- 76 Jul 18 2023 08:39:20 +00:00 boothelper.log
56583 -rw- 4785 Dec 13 2022 00:04:16 +00:00 packages.conf
56570 -rwx 916 Jul 18 2023 08:41:16 +00:00 vlan.dat
56571 -rw- 132108 Jul 18 2023 08:39:38 +00:00 memleak.tcl
56569 drwx 4096 Jul 18 2023 08:38:59 +00:00 .installer
8083 -rw- 185 Jul 18 2023 08:39:02 +00:00 bootloader_evt_handle .log
64641 drwx 4096 Aug 16 2022 18:31:34 +00:00 core
72722 drwx 4096 Dec 13 2022 00:09:38 +00:00 .prst_sync
88881 drwx 4096 Aug 16 2022 18:20:16 +00:00 .rollback_timer
11 drwx 4096 Aug 16 2022 18:20:20 +00:00 gs_script
8084 drwx 4096 Aug 16 2022 18:20:20 +00:00 tech_support
16162 drwx 4096 Jul 18 2023 08:39:16 +00:00 dc_profile_dir
56563 -rw- 76 Apr 18 2023 09:25:06 +00:00 boothelper.old
72723 drwx 4096 Aug 16 2022 18:35:50 +00:00 .dbpersist
56577 -rw- 0 Jul 18 2023 08:40:45 +00:00 rdope_out.txt
56578 -rw- 545 Jul 18 2023 08:40:57 +00:00 rdope.log
56579 -rw- 2097152 Jul 23 2023 18:13:29 +00:00 nvram_config_bkup
72724 drwx 4096 Aug 16 2022 18:31:18 +00:00 onep
56585 -rw- 20097668 Dec 13 2022 00:00:55 +00:00 cat3k_caa-guestshell. 16.12.08.SPA.pkg
32348 -rw- 32793140 Dec 13 2022 00:02:38 +00:00 cat3k_caa-rpbase.16.12.08.SPA.pkg
80806 -rw- 401195644 Dec 13 2022 00:02:26 +00:00 cat3k_caa-rpcore.16.12.08.SPA.pkg
32347 -rw- 3418756 Dec 13 2022 00:02:33 +00:00 cat3k_caa-srdriver.16.12.08.SPA.pkg
56586 -rw- 23018112 Dec 13 2022 00:02:33 +00:00 cat3k_caa-webui.16.12.08.SPA.pkg

[Leo Laohoo]

Post the complete output to the command "more flash:packages.conf | begin for CAT".