05-14-2012 10:52 AM - edited 03-07-2019 06:41 AM
Hi All,
We recently perchaced 4503 switch with Sub Engine 7L. It has universal IOS.
We are unable to run EIGRP and HSRP protocol and the switch came with temporal license.
Please help us ,how to proceed further to get EIGRP and HSRP enabled on the 4503 switch
Thanks
Sri
05-14-2012 11:17 AM
Hi,
What is your license level?
See table-3 in this link for license packages.
http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps4324/qa_c67-621718.html
HTH
05-15-2012 04:27 AM
Hi Shariff,
Thanks for your response
cat4500e-UNIVERSALK9-M switch has loaded with cat4500e-universalk9.SPA.03.02.00.XO.150-2.XO.bin IOS.
4503#sh license all
License Store: Primary License Storage
License Store: Dynamic License Storage
StoreIndex: 0 Feature: entservices Version: 1.0
License Type: Evaluation
Evaluation total period: 8 weeks 4 days
Evaluation period left: 8 weeks 4 days
License State: Active, Not in Use, EULA not accepted
License Count: Non-Counted
License Priority: None
4503#sh module
Chassis Type : WS-C4503-E
Power consumed by backplane : 0 Watts
Mod Ports Card Type Model Serial No.
---+-----+--------------------------------------+------------------+-----------
1 6 Sup 7L-E 10GE (SFP+), 1000BaseX (SFP) WS-X45-SUP7L-E CAT1602L47B
2 48 10/100/1000BaseT Premium POE E Series WS-X4648-RJ45V+E JAE16080079
3 12 1000BaseX (SFP) WS-X4612-SFP-E JAE16030BXJ
But we are unable to enble EIGRP,HSRP on 4503 switch, since those commands are NOT available on the switch.
Can you please help me how to proceed further to get EIGRP/HSRP enabled on the switch.
Thanks
Sri
05-15-2012 04:41 PM
conf t
license boot module
end
reboot
05-16-2012 03:06 AM
Hi Leo,
The command is NOT available ,which you have provided.
Switch(config)#license boot ?
level which level to boot
Switch(config)#license boot level ?
WORD license boot level
Please help
Thanks
Sri
05-16-2012 03:56 AM
Ok, try "license accept end user policy".
05-16-2012 04:17 AM
"License accept end user policy" NOT available
Switch(config)#license ?
agent Configure License Agent to communicate with CLM
boot license boot config commands
call-home license call-home config commands
thanks
Sri
05-18-2012 02:47 AM
So what happens when you go "license boot ?"
05-18-2012 04:29 AM
switch(config)#license boot ?
level which level to boot
switch(config)#license boot level ?
WORD license boot level
----------------
switch #sh license all
License Store: Primary License Storage
License Store: Dynamic License Storage
StoreIndex: 0 Feature: entservices Version: 1.0
License Type: Evaluation
Evaluation total period: 8 weeks 4 days
Evaluation period left: 8 weeks 4 days
License State: Active, Not in Use, EULA not accepted
License Count: Non-Counted
License Priority: None
------------------------------
switch(config)#license boot level ?
WORD license boot level
------------------------
Universal IOS installed.
---------------------------
switch#sh license all
License Store: Primary License Storage
License Store: Dynamic License Storage
StoreIndex: 0 Feature: entservices Version: 1.0
License Type: Evaluation
Evaluation total period: 8 weeks 4 days
Evaluation period left: 8 weeks 4 days
License State: Active, Not in Use, EULA not accepted
License Count: Non-Counted
License Priority: None
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide