Hi,
I am trying to identify what QoS marked packets are hitting an interface on my 4500E
Previously with the likes of the 2900 / 3500 I could collect the below information which was a great insight into the packets going through the interface. Is there anything like this for the 4500E on a Sup7? I've not been able to find anything.so far.
xxx-C2960S-1#sh mls qos interface gi 1/0/7 statistics
GigabitEthernet1/0/7 (All statistics are in packets)
dscp: incoming
-------------------------------
0 - 4 : 1302269597 0 0 0 0
5 - 9 : 0 0 0 0 0
10 - 14 : 0 0 0 0 0
15 - 19 : 0 0 0 0 0
20 - 24 : 0 0 0 0 0
25 - 29 : 0 0 0 0 0
30 - 34 : 0 0 0 0 0
35 - 39 : 0 0 0 0 0
40 - 44 : 0 0 0 0 0
45 - 49 : 0 5423748 0 0 0
50 - 54 : 0 0 0 0 0
55 - 59 : 0 0 0 0 0
60 - 64 : 0 0 0 0
dscp: outgoing
-------------------------------
0 - 4 : 468742 0 0 0 2
5 - 9 : 0 0 0 0 0
10 - 14 : 0 0 0 0 0
15 - 19 : 0 0 0 88 0
20 - 24 : 0 0 0 0 0
25 - 29 : 0 1 0 0 0
30 - 34 : 0 0 0 0 0
35 - 39 : 0 0 0 0 0
40 - 44 : 712552 0 0 0 0
45 - 49 : 0 103878 0 0 0
50 - 54 : 0 0 0 0 0
55 - 59 : 0 0 0 0 0
60 - 64 : 0 0 0 0
cos: incoming
-------------------------------
0 - 4 : 1308766828 0 0 0 0
5 - 7 : 0 0 0
cos: outgoing
-------------------------------
0 - 4 : 798470028 5273 27854 4668 26113
5 - 7 : 1528536 3100 6624488
output queues enqueued:
queue: threshold1 threshold2 threshold3
-----------------------------------------------
queue 0: 1524413 0 0
queue 1: 804613095 1111802 6650008
queue 2: 89 0 0
queue 3: 0 0 0
output queues dropped:
queue: threshold1 threshold2 threshold3
-----------------------------------------------
queue 0: 706 0 0
queue 1: 4426 0 0
queue 2: 0 0 0
queue 3: 0 0 0
Policer: Inprofile: 0 OutofProfile: 0
xxxx-C2960S-1#
