4900M aaa radius source vrf

[draganskundric]

How can I make 4900M send aaa radius auth requests using mgmtVrf vrf. There is no vrf part in ip radius source-interface command.

br

[andtoth]

Hi,

Based on the Release Notes from 12.2(54)SG, VRF-aware TACACS is supported.

http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/release/note/OL_15594.html

The switch configuration can be found on the following link, although it does not explicitly mention RADIUS.

http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/12.2/54sg/configuration/guide/vrf.html

I don't have access to a lab device with 12.2(54)SG right now, could you check whether per-vrf radius is working with that version based on the config guide?

Best regards,

Andras