Hi everyone
I was doing some research on the Nexus 5000 as I would implement it in one project and I found one thing here regarding the 5548UP which by name should support Unified port within the 32 1/10G fixed SFP+ port as already mentioned in the following links:
Compare Models:
http://www.cisco.com/en/US/products/ps9670/prod_models_comparison.html
Cisco Nexus 5548UP Switch
http://www.cisco.com/en/US/products/ps11681/index.html
but here under Cisco Nexus 5000 Series Hardware Installation Guide it says it would Support SFP+ Ethernet and FCOE and there is no mention of Native FC except if we consider the expansion moudule.
here what is mentioned for both "
The Cisco Nexus 5548UP switch is a 10-Gigabit Ethernet and FCoE switch that offers up to 960-Gbps throughput and up to 48 ports. The switch has 32 fixed 1- or 10-Gbps SFP+ Ethernet and FCoE ports and one expansion slot. The expansion slot supports GEMs that offer 16 10-Gigabit Ethernet ports, eight 10-Gigabit Ethernet ports and eight 10-Gigabit FCoE ports, or 16 10-Gigabit Ethernet/FCoE ports. This switch has an orange lable with "Cisco Nexus 5548UP" above the Cisco logo on the front of the chassis.
The Cisco Nexus 5548P switch is a 10-Gigabit Ethernet switch that offers up to 960-Gbps throughput and up to 48 ports. The switch has 32 fixed 1- or 10-Gbps SFP+ Ethernet and FCoE ports and one expansion slot. The expansion slot supports GEMs that offer 16 10-Gigabit Ethernet ports or eight 10-Gigabit Ethernet ports and eight 10-Gigabit FCoE ports. This switch has a gray label with "Cisco Nexus 5548P" above the Cisco logo on the front of the chassis. "
http://www.cisco.com/en/US/docs/switches/datacenter/nexus5000/hw/installation/guide/overview5500.html#wp1258772
So have I miss anything here or the Installation Guide is missing the word FC within the 5548UP to complete the description"?
