10-27-2008 01:08 AM - edited 03-06-2019 02:09 AM
Hello;
We have following modules that were recently used in a 6509 chassis(not E series). Now we will buy a 6506-E chassis to plug these modules in. Are Sup2 and 6506-E chassis compatible?
Catalyst 6000 supervisor 2 (Active) WS-X6K-SUP2-2GE
Pure SFM-mode 16 port 1000mb GBIC WS-X6816-GBIC
SFM-capable 16 port 10/100/1000mb RJ45 WS-X6516-GE-TX
Switching Fabric Module-136 (Active) WS-X6500-SFM2
SFM-capable 16 port 10/100/1000mb RJ45 WS-X6516-GE-TX
Intrusion Detection System WS-SVC-IDSM-2
SFM-capable 48 port 10/100/1000mb RJ45 WS-X6548-GE-TX
10-27-2008 02:50 AM
Yes all these modules and the supervisor will work in an E-chassis. Bear in mind you will need a different Fan for the E-chassis and probably power supplies as well.
Jon
10-27-2008 04:57 AM
The link below shows that power supplies are compatible.
10-27-2008 05:04 AM
Probably are. It's just that the E-fan needs minimum of 2500W power supplies. You could have been running with 1300W power supplies so that is why i said probably.
Jon
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide