6509E Switch - Quick Question

[Ahmed Hamdy]

Dear All,

1- If one of my customers has one core switch 6509E with two supervisors (VS-SUP2T-10G), it will support SSO and how to check this point ?

2- If we need to add SFP module (WSX6824-sfp) to the above mentioned switch, if this modules still available to be sale or not ? 

Thank you.

[Joseph W. Doherty]

#1 see if redundancy configured and active.

#2 I believe they still are, but you can check end-of-life announcements.

[mamdohmardini]

try the command show redundancy

[Tai Nguyen]

1. You can check by command: show redundancy or show module

2. Is it WS-X6824-SFP-2T= ?

[Ahmed Hamdy]

1- I don't have access to the Switch, i'm the presales engineer and need to clarify this point.

2- Yes it WS-X6824-SFP-2T and already found it.

[Tai Nguyen · Accepted solution]

Switch6509#sh redundancy
Redundant System Information :
------------------------------
Available system uptime = 44 weeks, 5 days, 11 hours, 50 minutes
Switchovers system experienced = 0
Standby failures = 0
 Last switchover reason = none

 Hardware Mode = Simplex
 Configured Redundancy Mode = sso
 Operating Redundancy Mode = sso   --> This point
 Maintenance Mode = Disabled
 Communications = Down      Reason: Simplex mode

Switch6509#sh module
Mod Ports Card Type                              Model              Serial No.
--- ----- -------------------------------------- ------------------ -----------
  1   24  CEF720 24 port 1000mb SFP              WS-X6824-SFP       
  2   24  CEF720 24 port 1000mb SFP              WS-X6824-SFP       
  3   48  CEF720 48 port 10/100/1000mb Ethernet  WS-X6848-GE-TX    
  5    5  Supervisor Engine 2T 10GE w/ CTS (Acti VS-SUP2T-10G      

==> It's support mode SSO

[Ahmed Hamdy]

Thank you.