6513 had the UPS on one of the power supplies removed. The secondary PS remained up, but the system crashed. The power usage isn't at a level where the system couldn't handle the load. It shows redundant, but it isn't on this output.
The other odd thing is it's showing a redundant sup for power allocation that doesn't exist.
6513#sh power status all
Power-Capacity PS-Fan Output Oper
PS Type Watts A @42V Status Status State
---- ------------------ ------- ------ ------ ------ -----
1 WS-CAC-6000W 2671.20 63.60 OK OK on
2 WS-CAC-6000W 2671.20 63.60 OK OK on
Pwr-Allocated Oper
Fan Type Watts A @42V State
---- ------------------ ------- ------ -----
1 WS-C6K-13SLT-FAN2 298.20 7.10 OK
Pwr-Requested Pwr-Allocated Admin Oper
Slot Card-Type Watts A @42V Watts A @42V State State
---- ------------------ ------- ------ ------- ------ ----- -----
1 WS-X6148-GE-TX 103.74 2.47 103.74 2.47 on on
2 WS-X6148-GE-TX 103.74 2.47 103.74 2.47 on on
3 WS-X6148-GE-TX 103.74 2.47 103.74 2.47 on on
7 WS-SUP32-10GE-3B 175.98 4.19 175.98 4.19 on on
8 (Redundant Sup) - - 175.98 4.19 - -
9 WS-X6408A-GBIC 84.00 2.00 84.00 2.00 on on
Code: s3223-ipbase_wan-mz.122-18.SXF13.bin
av1#sh mod
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
1 48 48 port 10/100/1000mb EtherModule WS-X6148-GE-TX SALxxxxxxxx
2 48 48 port 10/100/1000mb EtherModule WS-X6148-GE-TX SALxxxxxxxx
3 48 48 port 10/100/1000mb EtherModule WS-X6148-GE-TX SALxxxxxxxx
7 3 Supervisor Engine 32 10GE (Active) WS-SUP32-10GE-3B SALxxxxxxxx
9 8 8 port 1000mb GBIC Enhanced QoS WS-X6408A-GBIC SALxxxxxxxx
Mod MAC addresses Hw Fw Sw Status
--- ---------------------------------- ------ ------------ ------------ -------
1 001f.9e3e.eab0 to 001f.9e3e.eadf 7.2 7.2(1) 8.5(0.46)RFW Ok
2 001f.6cc3.fdf0 to 001f.6cc3.fe1f 7.2 7.2(1) 8.5(0.46)RFW Ok
3 001f.9e79.d720 to 001f.9e79.d74f 7.2 7.2(1) 8.5(0.46)RFW Ok
7 001e.4a68.c5ea to 001e.4a68.c5ef 1.5 12.2(18r)SX2 12.2(18)SXF1 Ok
9 001f.ca3f.8568 to 001f.ca3f.856f 4.2 5.4(2) 8.5(0.46)RFW Ok
Mod Sub-Module Model Serial Hw Status
---- --------------------------- ------------------ ----------- ------- -------
7 Policy Feature Card 3 WS-F6K-PFC3B SAL1206FTTJ 2.3 Ok
7 Cat6k MSFC 2A daughterboard WS-F6K-MSFC2A SAL1205ERP8 4.0 Ok
Mod Online Diag Status
---- -------------------
1 Pass
2 Pass
3 Pass
7 Pass
9 Pass
