802.1Q /VLAN support Cisco ISR 1100 series

[ShahryarAli8528]

If somebody can confirm if it is supported on ISR 1100 series. The features navigator does not mention it nor the configuration guides.

[Mark Elsen]

 - Check if the referenced-document below can help you ; especially try the commands in the section 

           How to Configure IEEE 802.1Q-in-Q VLAN Tag Termination  and check if these work on your platform

 https://content.cisco.com/chapter.sjs?uri=%2Fsearchable%2Fchapter%2Fcontent%2Fen%2Fus%2Ftd%2Fdocs%2Fios-xml%2Fios%2Flanswitch%2Fconfiguration%2Fxe-16-7%2Flanswitch-xe-16-7-book%2Flnsw-ieee-qvlan.html.xml&platform=Cisco%201000%20Series%20Integrated%20...

[Georg Pauwen]

Hello,

the Feature Navigator is not the very best way to check for feature availability. The respective data sheets typically have all that information.

Check Table 6 section 'Encapsulations', 802.1Q is listed there:

https://www.cisco.com/c/en/us/products/collateral/routers/1000-series-integrated-services-routers-isr/datasheet-c78-739512.html

[Reza Sharifi]

Appears to be supported:

see link for vlan1 config:

https://www.cisco.com/c/en/us/td/docs/routers/access/1100/software/configuration/xe-16-8/cisco_1100_series_swcfg_xe_16_8_x/cisco_1100_series_swcfg_chapter_01000.html

HTH

[Leo Laohoo]

We have a few 1100 running.
802.1q is the only encapsulation protocol allowed.
ISL is no longer an option since 3650/3850 was released.