802.1x with multi-auth - Clients on same Port in different VLAN
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
06-24-2020 12:57 AM
Hi,
is it possible to connect clients via on Interface to different VLANs when using 802.1x multi-auth?
Example:
Interface Gi1/0/1 (all clients connected to the same port)
Client 1 - VLAN 11
Client 2 - VLAN 12
Client 3 - VLAN 13
Tried to check the documentation, but it's still unclear for me.
I thought yes, but yesterday I learned that it doesn't work that way.
So the question: should that work?
Best regards
Stefan
- Labels:
-
LAN Switching
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
07-09-2020 04:12 AM
Today i found this:
Switch# sh mac address-table interface GigabitEthernet4/0/29
Mac Address Table
-------------------------------------------
Vlan Mac Address Type Ports
---- ----------- -------- -----
211 aaaa.aaaa.aaaa STATIC Gi4/0/29
211 bbbb.bbbb.bbbb STATIC Gi4/0/29
211 cccc.cccc.cccc STATIC Gi4/0/29
222 dddd.dddd.dddd STATIC Gi4/0/29
Total Mac Addresses for this criterion: 4
Switch#
One Device in another VLAN.
Now i'm confused.
Is that a feature that should work?
Are there any limitations depending on IOS Version?
