Today i found this:
Switch# sh mac address-table interface GigabitEthernet4/0/29
Mac Address Table
-------------------------------------------
Vlan Mac Address Type Ports
---- ----------- -------- -----
211 aaaa.aaaa.aaaa STATIC Gi4/0/29
211 bbbb.bbbb.bbbb STATIC Gi4/0/29
211 cccc.cccc.cccc STATIC Gi4/0/29
222 dddd.dddd.dddd STATIC Gi4/0/29
Total Mac Addresses for this criterion: 4
Switch#
One Device in another VLAN.
Now i'm confused.
Is that a feature that should work?
Are there any limitations depending on IOS Version?