I have a cisco 9300-24T with 8 x 10G NM. I am planning to stack the switch with another 24T or 48T 9300. According to 9300 datasheet, it as 16MB buffer per SKU.
What I am not clear is that under stack setup, this 16MB is shared among all the switch members or each stack member will use its own buffer?
Switch buffer is quite importance consideration for me as I will have a couple of 10G uplink circuits that going to distribute toward 1G access ports. Managing microburst from the 10G uplink are quite important to me.
Looking forward for some comments or advise. Thanks.
Regards
Kevin
