9300 Switch 10G SFP LED green-amber blinking

[prakash.choudhari]

Yesterday  I did connect 10G SFP on Uplink port of cisco 9300 to Server 10GNIC card and Port negotiated (Port & line Protocol is UP)

No crc error , no Output drops but LED status not glowing  Green continuously but its Blinking  Green-Amber continuously .

is it normal?.pls.suggest

[Leo Laohoo]

Post the complete output to the command "sh interface <PORT> controll".

NOTE:  Do not post screenshots.

[marce1000]

 - Check the logs on the 9300 when the port is being connected and check the networking related events (logs) on the server too.

 M.

[Georg Pauwen]

Hello,

--> no Output drops but LED status not glowing Green continuously but its Blinking Green-Amber continuously .

It is unclear what color/activity the port has, as you describe three different states simultaneously (not glowing/green continuously/blinking green-amber continuously).

The default is:

Blinking green Port is operating at up to 10 Gb/s.

Post a picture of the actual port LED.

[kevin.g]

I think he means, that the port LEDs are alternating green/amber, which would mean a link fault.

Check on the other error counters, not just CRC and see if the server or 9300 output anything in log.