cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2354
Views
0
Helpful
2
Replies

A vlanTrunkPortDynamicStatusChange

Hi there,

On our network we are receiving many of these informational traps. We have many devices on our networks however the following error presents its self regularly or occasionally on only a small percentage of our devices. Couldnt find a clear explanation of what it means and how to fix it properly.

Our trunks are all configured with switchport mode trunk and nonenegotiate. 

1. Error on our network monitoring system.

A vlanTrunkPortDynamicStatusChange notification is  generated by a device when the value of vlanTrunkPortDynamicStatus  object has been changed.

Thanks

R

2 Replies 2

chaitu_kranthi
Level 1
Level 1

Hi,

Are you able to see any logs on the switch, if yes please provide the same. so that it will be clear picture for understanding.

example 1.

Device-A

there has been 114 instances of the error on device A. Last occurence nov 20th 12:37:12 PM

Device-A# show log

Nov 20 12:34:38.631 EST: %PIM-5-DRCHG: DR change from neighbor 0.0.0.0 to 10.97.58.1 on interface Vlan508

.Nov 20 12:34:54.283 EST: %OSPF-5-ADJCHG: Process 6, Nbr 74.216.162.72 on GigabitEthernet9/48 from LOADING to FULL, Loading Done

.Nov 20 12:35:21.631 EST: %PIM-5-DRCHG: DR change from neighbor 0.0.0.0 to 10.x.x.1 on interface Vlan506

.Nov 20 12:35:33.631 EST: %PIM-5-DRCHG: DR change from neighbor 0.0.0.0 to 10.x.x.1 on interface Vlan502

.Nov 20 12:35:55.631 EST: %PIM-5-DRCHG: DR change from neighbor 0.0.0.0 to 10.x.x.1 on interface Vlan408

.Nov 20 12:37:28.632 EST: %PIM-5-DRCHG: DR change from neighbor 0.0.0.0 to 10.x.x.1 on interface Vlan504

.Nov 20 16:19:51.259 EST: %PIM-5-DRCHG: DR change from neighbor 0.0.0.0 to 10.x.x.1 on interface Vlan40

.Nov 20 16:35:19.447 EST: %PIM-5-DRCHG: DR change from neighbor 0.0.0.0 to 10.x.x.1 on interface Vlan20

.Nov 20 16:35:27.448 EST: %PIM-5-DRCHG: DR change from neighbor 0.0.0.0 to 10.x.x.1 on interface Vlan20

.Nov 20 16:40:32.570 EST: %PIM-5-DRCHG: DR change from neighbor 0.0.0.0 to 10.x.x.1 on interface Vlan20

.Nov 20 16:54:55.647 EST: %PIM-5-DRCHG: DR change from neighbor 0.0.0.0 to 10.x.x.1 on interface Vlan40

06-01-02-97-62-241#

Example 2.

Device-A

Threre have been 21 instances and last instance was October 26 2011

device-B# show log

Oct 26 16:24:17.622 EDT: %PIM-5-DRCHG: DR change from neighbor 0.0.0.0 to 10.x.x.1 on interface Vlan500

Oct 26 16:24:17.622 EDT: %PIM-5-DRCHG: DR change from neighbor 0.0.0.0 to 10.x.x.1 on interface Vlan600

Oct 26 16:25:06.647 EDT: %PIM-5-DRCHG: DR change from neighbor 0.0.0.0 to 10.x.x.1 on interface Vlan560

Oct 26 16:25:10.647 EDT: %PIM-5-DRCHG: DR change from neighbor 0.0.0.0 to 10.x.x.1 on interface Vlan540

Oct 31 09:10:57.783 EDT: %SYS-5-CONFIG_I: Configured from console by ccoffee on vty0 (10.x.x.201)

Oct 31 11:57:10.139 EDT: SSH2 0: Unexpected message received

Nov 17 15:46:00.957 PST: %SYS-5-CONFIG_I: Configured from console by ccoffee on vty1 (10.x.x.x)

Nov 17 16:09:44.087 PST: SSH2 0: Unexpected message received

device-B#

Review Cisco Networking for a $25 gift card