08-21-2013 08:10 PM - edited 03-07-2019 03:03 PM
Hi All,
I am trying these two command to be on switch at same time but switch only takes one command on its running config
3550SMIA#sh run | inc aaa
aaa new-model
aaa authentication login MP group tacacs+ enable 1
aaa authorization exec default local
aaa authorization exec MP none
aaa session-id common
3550SMIA#config t
Enter configuration commands, one per line. End with CNTL/Z.
3550SMIA(config)#aaa authentication login MP none 2
3550SMIA(config)#end
3550SMIA#sh run | inc aaa
aaa new-model
aaa authentication login MP none
aaa authorization exec default local
aaa authorization exec MP none
aaa session-id common
3550SMIA#
As you can see the command 1 is gone now.
Is this the default behaviour with aaa authentication command ?
Regards
MAhesh
Solved! Go to Solution.
08-21-2013 08:26 PM
If you want both login authentication methods (TACACS+ with fallback to none) then they need to be concatenated on one line. e.g.:
aaa authentication login MP group tacacs+ enable none
See the example in the command reference here.
08-21-2013 08:26 PM
If you want both login authentication methods (TACACS+ with fallback to none) then they need to be concatenated on one line. e.g.:
aaa authentication login MP group tacacs+ enable none
See the example in the command reference here.
08-22-2013 12:49 PM
Many thanks Marvin.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide