Solved: Access List deny and permit users to access network printer - Page 2

alvin.baro@gmail.com · ‎03-27-2019

I need some help with access-list !

i have a subnet 172.16.1.0 255.255.250.0 (VLAN 1)

In the same subnet, I have a Network Printer 172.16.1.153

I need to deny all users to connect to network printer except for 2 users 172.16.1.36 and 172.16.1.115

Please see below picture for your reference.

Thanks!

paul driver · ‎03-28-2019

Hello

@Deepak Kumar
May I ask if that an assumption? As I don't see any reference to state that it is, However i do see a L3 switch so if this is flat network why the need for a L3 switch - Hence the question to the OP

Please rate and mark as an accepted solution if you have found any of the information provided useful.
This then could assist others on these forums to find a valuable answer and broadens the community’s global network.

Kind Regards
Paul

Deepak Kumar · ‎03-28-2019

Hi @paul driver

I didn't ask him why is he using L3 switch?

But He mentioned in the original question and

i have a subnet 172.16.1.0 255.255.250.0 (VLAN 1)

I was asked him "Can you move printer in another VLAN?" he replied as he doesn't have.

Regards,

Deepak Kumar

Regards,
Deepak Kumar,
Don't forget to vote and accept the solution if this comment will help you!